Solutions to some issues with Isudar Car Raio and Apple Carplay & Android Auto Module：

For Car Radio：

Ⅰ.T72:

1.If the side touch button does not work or does not function correctly, please click here to view the operation video to restore it.

2.If the screen touch fails or the touch response is reversed, please click here to view the operation video to restore it.

3.If the door information is displayed in reverse, please click here to view the operation video to restore it.

4.If you are unable to view the video, the system is closed by default for driving safety. Please click here to view the operation video for restoration.

5.If the volume knob is not working, please click here to view the operation video to restore it.

 6.If the steering wheel controls do not work after installing the radio, you will need to set up the correct Canbus type, please click here to view the setup video. (with Canbus)

7.If the aftermarket camera does not work or the image is incorrect, please click here to check whether the aftermarket camera is correctly connected and the correct camera format is selected.

8.If the radio has no sound, please click here to check whether the AUX or amplifier control cable is correctly connected.

9.If your radio background turns white, please click here to view the operation video to restore it.

10.If the radio cannot start normally after installing it:
1) For Fiat series, please first swap B1/B2 and connect the yellow B+ wire.

Please connect the red ACC wire and the yellow B+ wire of the Isudar power cable to see if the radio starts to rule out whether it is a Canbus problem or a radio problem.

For Apple Carplay & Android Auto Module：

Ⅰ.General Questions: Rear View Camera：

-Automatic transmission car:

1.Original rear view camera：No manual wiring is required, the rearview camera will work normally after the module is installed.

2.Aftermarket rear view camera: Manual wiring is required. The output plug of the camera extension cable is connected to the REAR CVBS, and the trigger cable is connected to CAM-12V. The trigger cable at the other end is connected to the red cable, and the black cable is grounded. (As shown in the picture)

-Manual transmission car:

1.Original rear view camera：Manual wiring is required. Connect the reverse control cable (Reveres) to the positive terminal of the reversing light.

2.Aftermarket rear view camera: Manual wiring is required. The output plug of the camera extension cable is connected to the REAR CVBS, and the trigger cable is connected to the REVERSE. The other end of the trigger cable is connected to the red cable and connected to the positive pole of the reversing light, and the black cable is grounded. (As shown in the figure)

Ⅱ. Screen display problem
1. The original radio page can be displayed, but it cannot be switched to Apple Carplay & Android Auto. When using a wired connection, the phone shows that it has been connected to Carplay & Android Auto:

-Please check whether the LVDS cable is connected well and connected to the correct position. The LVDS cable of some modules needs to be transferred to the wiring harness on the back of the screen, and some need to be transferred to the wiring harness on the back of the head unit.

Solutions to some issues with Isudar Car Raio and Apple Carplay & Android Auto Module：

For Car Radio：

Ⅰ.T72:

1.If the side touch button does not work or does not function correctly, please click here to view the operation video to restore it.

2.If the screen touch fails or the touch response is reversed, please click here to view the operation video to restore it.

3.If the door information is displayed in reverse, please click here to view the operation video to restore it.

4.If you are unable to view the video, the system is closed by default for driving safety. Please click here to view the operation video for restoration.

5.If the volume knob is not working, please click here to view the operation video to restore it.

 6.If the steering wheel controls do not work after installing the radio, you will need to set up the correct Canbus type, please click here to view the setup video. (with Canbus)

7.If the aftermarket camera does not work or the image is incorrect, please click here to check whether the aftermarket camera is correctly connected and the correct camera format is selected.

8.If the radio has no sound, please click here to check whether the AUX or amplifier control cable is correctly connected.

9.If your radio background turns white, please click here to view the operation video to restore it.

10.If the radio cannot start normally after installing it:
1) For Fiat series, please first swap B1/B2 and connect the yellow B+ wire.

Please connect the red ACC wire and the yellow B+ wire of the Isudar power cable to see if the radio starts to rule out whether it is a Canbus problem or a radio problem.

For Apple Carplay & Android Auto Module：

Ⅰ.General Questions: Rear View Camera：

-Automatic transmission car:

1.Original rear view camera：No manual wiring is required, the rearview camera will work normally after the module is installed.

2.Aftermarket rear view camera: Manual wiring is required. The output plug of the camera extension cable is connected to the REAR CVBS, and the trigger cable is connected to CAM-12V. The trigger cable at the other end is connected to the red cable, and the black cable is grounded. (As shown in the picture)

-Manual transmission car:

1.Original rear view camera：Manual wiring is required. Connect the reverse control cable (Reveres) to the positive terminal of the reversing light.

2.Aftermarket rear view camera: Manual wiring is required. The output plug of the camera extension cable is connected to the REAR CVBS, and the trigger cable is connected to the REVERSE. The other end of the trigger cable is connected to the red cable and connected to the positive pole of the reversing light, and the black cable is grounded. (As shown in the figure)

Ⅱ. Screen display problem
1. The original radio page can be displayed, but it cannot be switched to Apple Carplay & Android Auto. When using a wired connection, the phone shows that it has been connected to Carplay & Android Auto:

-Please check whether the LVDS cable is connected well and connected to the correct position. The LVDS cable of some modules needs to be transferred to the wiring harness on the back of the screen, and some need to be transferred to the wiring harness on the back of the head unit.