0Your Cart$0.00

You have no items in your shopping cart.

ISUDAR Official Shop

Installation&Guide-For Car Radio Installation&Guide-For Car Radio

By QiuChelsea

Installation：

Universal Car Radio Installation Guide:

1. Wiring Diagram:

2. Wiring Video:👉📕

Common Installation Tips：

CANBUS Wiring Precautions:
1) Not all vehicle models require a CANbus.
2) For car radios equipped with CANbus support, you must connect the CAN lines and the CANbus module, connect the car radio to a network, and then properly configure the CANbus type settings.👉📕

Backup Camera Wiring Guide：
1) Divided into original and aftermarket versions, connection steps:👉📕

Steering Wheel Control Learning & Setup
1) For car radios equipped with CANbus: Steering wheel control buttons cannot be customized manually, as they are decoded directly via the CANbus.
2) For car radios without CANbus: Steering wheel buttons can be customized directly using the dedicated “Steering Wheel” app.

Other Cable Installation Tips:
1. The Wi-Fi/Bluetooth antenna must be connected; otherwise, you will be unable to connect to Wi-Fi, or the signal strength will be very poor.
2. Please position the GPS antenna near the windshield.
3. SIM card not recognized or unable to provide network connectivity:👉📕

Car Model Specific Installation Guides:

For Lada Series👉📕
For Hyundai / Kia Series👉📕
For Renault / Dacia Series👉📕
For Opel / Vauxhall Series👉📕
For Volkswagen / VW Series👉📕
For Fiat / Alfa Romeo Series👉📕
For Citroën / Peugeot Series👉📕
For BMW / Mercedes / Audi / Porsche Series👉📕
For Jeep / Ford / Chrysler / Chevrolet / Dodge Series👉📕
For Toyota / Honda / Nissan / Mitsubishi / Mazda / Suzuki / Subaru Series👉📕

Official User Manuals：

For VT19/BT19👉📕

For T10C/M👉📕

For Q6👉📕

For Q74👉📕

For T72👉📕

For T75X:

1.NA18-T75👉📕

2.NA35-T75👉📕

Note：If you cannot find your exact car model, please follow the universal installation guide, most car radios share the same installation method.

Installation：

Universal Car Radio Installation Guide:

1. Wiring Diagram:

2. Wiring Video:👉📕

Common Installation Tips：

CANBUS Wiring Precautions:
1) Not all vehicle models require a CANbus.
2) For car radios equipped with CANbus support, you must connect the CAN lines and the CANbus module, connect the car radio to a network, and then properly configure the CANbus type settings.👉📕

Backup Camera Wiring Guide：
1) Divided into original and aftermarket versions, connection steps:👉📕

Steering Wheel Control Learning & Setup
1) For car radios equipped with CANbus: Steering wheel control buttons cannot be customized manually, as they are decoded directly via the CANbus.
2) For car radios without CANbus: Steering wheel buttons can be customized directly using the dedicated “Steering Wheel” app.

Other Cable Installation Tips:
1. The Wi-Fi/Bluetooth antenna must be connected; otherwise, you will be unable to connect to Wi-Fi, or the signal strength will be very poor.
2. Please position the GPS antenna near the windshield.
3. SIM card not recognized or unable to provide network connectivity:👉📕

Car Model Specific Installation Guides:

For Lada Series👉📕
For Hyundai / Kia Series👉📕
For Renault / Dacia Series👉📕
For Opel / Vauxhall Series👉📕
For Volkswagen / VW Series👉📕
For Fiat / Alfa Romeo Series👉📕
For Citroën / Peugeot Series👉📕
For BMW / Mercedes / Audi / Porsche Series👉📕
For Jeep / Ford / Chrysler / Chevrolet / Dodge Series👉📕
For Toyota / Honda / Nissan / Mitsubishi / Mazda / Suzuki / Subaru Series👉📕

Official User Manuals：

For VT19/BT19👉📕

For T10C/M👉📕

For Q6👉📕

For Q74👉📕

For T72👉📕

For T75X:

1.NA18-T75👉📕

2.NA35-T75👉📕

Note：If you cannot find your exact car model, please follow the universal installation guide, most car radios share the same installation method.

← Older Post Newer Post →

0 comments

Leave a comment

Please note, comments must be approved before they are published

Recent Posts
Tag Cloud
Just added to your wishlist:
My Wishlist
You've just added this product to the cart:
Go to cart page